Search our extensive catalog:
Showing 1–100 of 107 results
The product consists of a fine textured resilient top surface. The reverse side is coated with a pressure-sensitive adhesive covered by a removable protective liner. It features a high, friction, fine resilient textured, slip-resistant material. It has a reverse side coated with pressure-sensitive adhesive protected by a removable liner. Applications: bath area, showers, bathtubs,…
3M™ Vent Tape 394 is a non-woven, synthetic backing that meets most typical outgassing requirements for foam-in-place insulation processes in appliance and other industries and contains fungicide for use in areas of high humidity. Unique non-woven porous backing that has high air/gas permeability, good burst strength and solids barrier for minimal voids and less clean up. Pressure-sensitive…
3M™ Preservation Sealing Tape 4811 is a white polyethylene backing with a unique rubber adhesive that provides excellent performance as an industrial preservation tape. Can be applied from freezing to 120°F (49°C), removed at 0°F (-18°C). Effective for many outdoor applications in hot and cold weather over one year with quick, clean removal. White polyethylene backing provides good…
3M™ Ultra-Thin Water Contact Indicator Tape 5558 is an ultra-thin, 6.0 mil (152 micron) thick tape used to indicate water contact. The tape permanently changes from white to red upon direct water contact. Tape may be die cut using rotary die cutting process. Substrate should be smooth, clean, dry and oil-free to ensure good wet-out and adequate…
3M™ Water Contact Indicator Tape 5557 is a 10.2 mil (259 micron) thick tape used to indicate water contact. The tape turns from white to red upon direct water contact. Tape may be die cut using rotary die cutting process. Substrate should be smooth, clean, dry and oil-free to ensure good wet-out and adequate adhesion. Adhesive should not…
3M™ VHB™ Tapes provide the convenience and simplicity of a tape fastener and are ideal for use in many interior and exterior bonding applications. In many situations, they can replace rivets, spot welds, liquid adhesives and other permanent fasteners. These 3M™ VHB™ Tapes are made with acrylic foam which is viscoelastic in nature. This…
3M™ VHB™ Tapes provide the convenience and simplicity of a tape fastener and are ideal for use in many interior and exterior bonding applications. In many situations, they can replace rivets, spot welds, liquid adhesives and other permanent fasteners. These 3M™ VHB™ Tapes are made with acrylic foam which is viscoelastic in nature. This…
3M™ VHB™ Tapes provide the convenience and simplicity of a tape fastener and are ideal for use in many interior and exterior bonding applications. In many situations, they can replace rivets, spot welds, liquid adhesives and other permanent fasteners. These 3M™ VHB™ Tapes are made with acrylic foam which is viscoelastic in nature. This…
3M™ Weather Resistant Film Tape 838 can be used for many long-term weather resistant and protecting applications. Good aging properties because it contains no plasticizers. It also remains tough and flexible over a broad temperature range. The properties of Tedlar® film include excellent resistance to weathering, outstanding mechanical properties and inertness toward a wide variety of chemicals,…
This laminating adhesive is pigmented to increase the opacity of sub-surface graphics printed labels. It can be used when constructing custom tamper-indicating labels. Application: A component in the construction of labels designed for harsh environments such as in automotive and outdoor applications. Used to make tamper-indicating labels with 3M custom filled and solution components. These…
3M™ Repulpable Tapes R3227, R3257, R3287 and R3287SL† are double coated tapes with paper carriers coated with a high tack, high shear strength, repulpable adhesive. The tapes have repulpable easy-release paper liners. Water and alkali dispersibility are excellent and eliminate risk of contaminating the paper mill broke with non-repulpable materials. Packing in sealed plastic bags helps…
3M™ Repulpable Tapes R3227, R3257, R3287 and R3287SL† are double coated tapes with paper carriers coated with a high tack, high shear strength, repulpable adhesive. The tapes have repulpable easy-release paper liners. Water and alkali dispersibility are excellent and eliminate risk of contaminating the paper mill broke with non-repulpable materials. Packing in sealed plastic bags helps…
6560 is a high grade, printable white saturated paper backing with a specially formulated latex pressure sensitive adhesive system. It adheres to textured and smooth surfaces, and has a clean release after installation. It is lightweight, and has a low tack. Applications: Polished stainless steel, painted steel, chrome plated steel and polished brass, Mill finished…
Avery Dennison AFB 6111W is a white acrylic foam tape with double-coated multipurpose acrylic adhesive on both sides. It is used for bonding a wide range of high and medium surface energy substrates including metals and plastics including PC/ABS. This product has excellent adhesion and shear strength, and also resists UV lights and elevated temperatures….
Avery Dennison AFB 6112W is a white acrylic foam tape with doublecoated multipurpose acrylic adhesive on both sides. It is used for bonding a wide range of high and medium surface energy substrates including metals and plastics including PC/ABS. This product has excellent adhesion and shear strength, and also resists UV lights and elevated temperatures….
Avery Dennison AFB 6140W is a white acrylic foam tape with double coated multipurpose acrylic adhesive on both sides. It is used for bonding a wide range of high and medium surface energy substrates including metals and plastics including PC/ABS. This product has excellent adhesion and shear strength, and also resists UV lights and elevated…
Avery Dennison AFB 6164W is a white acrylic foam tape with double-coated multipurpose acrylic adhesive on both sides. It is used for bonding a wide range of high and medium surface energy substrates including metals and plastics including PC/ABS. This product has excellent adhesion and shear strength, and also resists UV lights and elevated temperatures….
Avery Dennison AFB 6180W is a white acrylic foam tape with double coated multipurpose acrylic adhesive on both sides. It is used for bonding a wide range of high and medium surface energy substrates including metals and plastics including PC/ABS. This product has excellent adhesion and shear strength, and also resists UV lights and elevated…
Avery Dennison AFB 6464W is a white acrylic foam tape with a double-coated low surface energy acrylic adhesive on both sides. It is used for bonding low surface energy substrates such as polyethylene and powder coated paints. This product has excellent adhesion and shear strength, and also resists UV lights and elevated temperatures. Viscoelastic acrylic…
Avery Dennison AFB 6610W is a white acrylic foam tape with double-coated general purpose acrylic adhesive on both sides. It is used for bonding a wide range of high surface energy substrates including metal and glass. This product has higher initial tack with good adhesion and shear strength, and also resists UV lights and elevated…
Avery Dennison AFB 6625W is a white acrylic foam tape with double-coated general purpose acrylic adhesive on both sides. It is used for bonding a wide range of high surface energy substrates including metal and glass. This product has high initial tack with good adhesion and shear strength, and also resists UV lights and elevated…
Avery Dennison FM 2116 combines high tack and adhesion with excellent shear perfromance, conformability to irregular surfaces, and excellent compression and shear properties. Strong bond to a variety of substrates. Conformability to irregular surfaces. Product reliability. Strong, tear resistant release liner. Applications: Designed for bonding to surfaces requiring conformability, cushioning and a high degree of…
Avery Dennison FM 2132 has a specially formulated rubber based adhesive, and white 1/32″ foam carrier. Combines high tack and adhesion with excellent shear performance. Comformability to irregular surfaces. Applications: Designed for bonding to a wide range of wood, metal and plastic substrates where foam thickness is required for conformability or shock resistance.
Avery Dennison FM 2136 is specially formulated high tack acrylic, 1/16″ foam carrier, and densified kraft release liner. It has excellent adhesion to painted metal surfaces, conformability to irregular surfaces, and resists mild plasticizers. Applications: Designed for fastening and mounting applications requiring a high tack acrylic adhesive system.
Avery Dennison FM 2333 is specially formulated acrylic adhesive system, 1/32″ white foam carrier, and densified kraft release linerd. Strong bond to a variety of substrates. Product reliability. Conformable to irregular surfaces. Strong release liner suitable for substratesThis product is excellent for bonding to a wide variety of substrates where foam thickness is needed for…
Avery Dennison FM 2456 has a very aggressive acrylic adhesive for strong, permanent bond, double-coated construction, and foam carrier for excellent line-to-line fit. Excellent bond to almost any surface. Good heat, humidity and solvent resistance. Good for filling and bonding rigid materials. Applications: Specifically specifically made to bond glass and ABS with superior moisture resistance.
Avery Dennison FT 0401 has Clean removability from plasticized substrates after aging. Strong polyester release liner. Release coating allows ease in label dispensing. Excellent die-cut properties. Stable polypropylene face-stock suitable for thermal transfer printing. Clean removability from credit card stock (PVC coated). Applications: Designed for printed label applications needing clean removability. Specially formulated acrylic with…
Avery Dennison FT 310 has high tack laminating adhesive. Specially designed removable mounting side adhesive. Strong plastic carrier. Medium release liner. Removability. Provides good initial adhesion to a wide variety of packaging substrates and low density PE foams. Clean removal from plastic, wood and glass surfaces. Excellent resistance to UV light. Excellent die-cutting characteristics. Offers…
Berry Plastics 509W is a white, multi-purpose, non-adhesive thread seal tape. It is easy to assemble and disassesemble, and is used on a wide variety of maintenance applications. Applications: Unsintered virgin polytetraflouroethylene (PTFE) self lubricates joints, making them easy to assemble and disassemble for a leak proof seal. Product can also be used on a…
Bow Tape 110 is a non-woven Double-Sided tape. It has a high initial tack and high adhesion to various plastics. It has an excellent adhesion and holding power, and is suitable for foam laminating. Applications: name plates, decoration panels, tv jack labels, and seat heater applications.
Bow Tape 1105T is a tissue Double-Sided tape. It has a high initial tack and high adhesion to various plastics. It has an excellent adhesion and holding power, and is suitable for foam laminating. Applications: name plates, decoration panels, tv jack labels, and seat heater applications.
Bow Tape 110C is a non-woven Double-Sided tape. It has a high initial tack and high adhesion to various plastics. It has an excellent adhesion and holding power, and is suitable for foam laminating. Applications: name plates, decoration panels, tv jack labels, and seat heater applications.
Bow Tape 110L is a non-woven Double-Sided tape. It has a high initial tack and high adhesion to various plastics. It has an excellent adhesion and holding power, and is suitable for foam laminating. Applications: name plates, decoration panels, tv jack labels, and seat heater applications.
Bow Tape 110QJ is a non-woven Double-Sided tape. It has a high initial tack and high adhesion to various plastics. It has an excellent adhesion and holding power, and is suitable for foam laminating. Applications: name plates, decoration panels, tv jack labels, and seat heater applications.
Bow Tape 110QJB is a non-woven Double-Sided tape. It has a high initial tack and high adhesion to various plastics. It has an excellent adhesion and holding power, and is suitable for foam laminating. Applications: name plates, decoration panels, tv jack labels, and seat heater applications.
Bow Tape 110QJM2 is a non-woven Double-Sided tape. It has a high initial tack and high adhesion to various plastics. It has an excellent adhesion and holding power, and is suitable for foam laminating. Applications: name plates, decoration panels, tv jack labels, and seat heater applications.
Bow Tape 110QJT is a non-woven Double-Sided tape. It has a high initial tack and high adhesion to various plastics. It has an excellent adhesion and holding power, and is suitable for foam laminating. Applications: name plates, decoration panels, tv jack labels, and seat heater applications.
Bow Tape 110QN is a non-woven Double-Sided tape. It has a high initial tack and high adhesion to various plastics. It has an excellent adhesion and holding power, and is suitable for foam laminating. Applications: name plates, decoration panels, tv jack labels, and seat heater applications.
Bow Tape 110QT is a non-woven Double-Sided tape. It has a high initial tack and high adhesion to various plastics. It has an excellent adhesion and holding power, and is suitable for foam laminating. Applications: name plates, decoration panels, tv jack labels, and seat heater applications.
Bow Tape 380 is a Double-Sided film tape. It has a PVC film carrier. Excellent initial adhesion. Suitable to rough & embossed surfaces. It has high tack and good shear strength. The adhesive sets up fast and bonds firmly for a long lasting performance. It resists UV light, and resists plasticizer migration. It is specially…
Bow Tape 382 is a Double-Sided film tape. It has a PVC film carrier. Excellent initial adhesion. Suitable to rough & embossed surfaces. It has high tack and good shear strength. The adhesive sets up fast and bonds firmly for a long lasting performance. It resists UV light, and resists plasticizer migration. It is specially…
Bow Tape 390W is a PE foam Double-Sided tape. It has a polyethylene foam carrier. Good function well as insulation tape for vibration, impact. Easy application to curved surface. Excellent application to parts which require. Applications: Recommended for exterior mounting in automobiles (only used on flat surfaces), side mirror mounting, automotive aftermarket, panel trim, decorative…
Bow Tape 391W is a PE foam Double-Sided tape. It has a polyethylene foam carrier. Good function well as insulation tape for vibration, impact. Easy application to curved surface. Excellent application to parts which require. Applications: Recommended for exterior mounting in automobiles (only used on flat surfaces), side mirror mounting, automotive aftermarket, panel trim, decorative…
Bow Tape 3914W is a PE foam Double-Sided tape. It has a polyethylene foam carrier. Good function well as insulation tape for vibration, impact. Easy application to curved surface. Excellent application to parts which require. Applications: Recommended for exterior mounting in automobiles (only used on flat surfaces), side mirror mounting, automotive aftermarket, panel trim, decorative…
Bow Tape 398EW is a PE foam Double-Sided tape. It has a polyethylene foam carrier. Good function well as insulation tape for vibration, impact. Easy application to curved surface. Excellent application to parts which require. Applications: Recommended for exterior mounting in automobiles (only used on flat surfaces), side mirror mounting, automotive aftermarket, panel trim, decorative…
Bow Tape 398EXW is a PE foam Double-Sided tape. It has a polyethylene foam carrier. Good function well as insulation tape for vibration, impact. Easy application to curved surface. Excellent application to parts which require. Applications: Recommended for exterior mounting in automobiles (only used on flat surfaces), side mirror mounting, automotive aftermarket, panel trim, decorative…
Bow Tape 7025WE is a acrylic foam Double-Sided tape. The acrylic foam coating. It has excellent resistance to solvents and temperature cycles. Unique properties of absorption shock and damping vibration. Good flexibility / softness for curve line. White color. Applications: Protect side molding, name plates, wheel cap logo emblems, edge guards, weather strips, and elevators.
Bow Tape 704WE is a acrylic foam Double-Sided tape. The acrylic foam coating. It has excellent resistance to solvents and temperature cycles. Unique properties of absorption shock and damping vibration. Good flexibility / softness for curve line. White color. Applications: Protect side molding, name plates, wheel cap logo emblems, edge guards, weather strips, and elevators.
Bow Tape 704WS is a acrylic foam Double-Sided tape. It has a arylic self-sticking layer. It has excellent resistance to solvents and temperature cycles. Unique properties of absorption shock and damping vibration. Good flexibility / softness for curve line. White color. Applications: Protect side molding, name plates, wheel cap logo emblems, edge guards, weather strips,…
Bow Tape 706W is a acrylic foam Double-Sided tape. The acrylic foam coating. It has excellent resistance to solvents and temperature cycles. Unique properties of absorption shock and damping vibration. Good flexibility / softness for curve line. White color. Applications: Protect side molding, name plates, wheel cap logo emblems, edge guards, weather strips, and elevators.
Bow Tape 706WL is a acrylic foam Double-Sided tape. The acrylic foam coating. It has excellent resistance to solvents and temperature cycles. Unique properties of absorption shock and damping vibration. Good flexibility / softness for curve line. White color. LSE adhesive. Applications: Protect side molding, name plates, wheel cap logo emblems, edge guards, weather strips, and…
Bow Tape 708W is a acrylic foam Double-Sided tape. The acrylic foam coating. It has excellent resistance to solvents and temperature cycles. Unique properties of absorption shock and damping vibration. Good flexibility / softness for curve line. White color. Applications: Protect side molding, name plates, wheel cap logo emblems, edge guards, weather strips, and elevators.
Bow Tape 708WS is a acrylic foam Double-Sided tape. It has a arylic self-sticking layer. It has excellent resistance to solvents and temperature cycles. Unique properties of absorption shock and damping vibration. Good flexibility / softness for curve line. White color. Applications: Protect side molding, name plates, wheel cap logo emblems, edge guards, weather strips,…
Bow Tape 711W is a acrylic foam Double-Sided tape. The acrylic foam coating. It has excellent resistance to solvents and temperature cycles. Unique properties of absorption shock and damping vibration. Good flexibility / softness for curve line. White color. Applications: Protect side molding, name plates, wheel cap logo emblems, edge guards, weather strips, and elevators.
Bow Tape 711WL is a acrylic foam Double-Sided tape. The acrylic foam coating. It has excellent resistance to solvents and temperature cycles. Unique properties of absorption shock and damping vibration. Good flexibility / softness for curve line. White color. LSE adhesive. Applications: Protect side molding, name plates, wheel cap logo emblems, edge guards, weather strips, and…
Bow Tape 711WS is a acrylic foam Double-Sided tape. It has a arylic self-sticking layer. It has excellent resistance to solvents and temperature cycles. Unique properties of absorption shock and damping vibration. Good flexibility / softness for curve line. White color. Applications: Protect side molding, name plates, wheel cap logo emblems, edge guards, weather strips,…
Bow Tape 716W is a acrylic foam Double-Sided tape. The acrylic foam coating. It has excellent resistance to solvents and temperature cycles. Unique properties of absorption shock and damping vibration. Good flexibility / softness for curve line. White color. Applications: Protect side molding, name plates, wheel cap logo emblems, edge guards, weather strips, and elevators.
Bow Tape 716WS is a acrylic foam Double-Sided tape. It has a arylic self-sticking layer. It has excellent resistance to solvents and temperature cycles. Unique properties of absorption shock and damping vibration. Good flexibility / softness for curve line. White color. Applications: Protect side molding, name plates, wheel cap logo emblems, edge guards, weather strips,…
Bow Tape 720W is a acrylic foam Double-Sided tape. The acrylic foam coating. It has excellent resistance to solvents and temperature cycles. Unique properties of absorption shock and damping vibration. Good flexibility / softness for curve line. White color. Applications: Protect side molding, name plates, wheel cap logo emblems, edge guards, weather strips, and elevators.
Bow Tape 720WS is a acrylic foam Double-Sided tape. It has a arylic self-sticking layer. It has excellent resistance to solvents and temperature cycles. Unique properties of absorption shock and damping vibration. Good flexibility / softness for curve line. White color. Applications: Protect side molding, name plates, wheel cap logo emblems, edge guards, weather strips,…
Bow Tape 730W is a acrylic foam Double-Sided tape. The acrylic foam coating. It has excellent resistance to solvents and temperature cycles. Unique properties of absorption shock and damping vibration. Good flexibility / softness for curve line. White color. Applications: Protect side molding, name plates, wheel cap logo emblems, edge guards, weather strips, and elevators.
Bow Tape 730WS is a acrylic foam Double-Sided tape. It has a arylic self-sticking layer. It has excellent resistance to solvents and temperature cycles. Unique properties of absorption shock and damping vibration. Good flexibility / softness for curve line. White color. Applications: Protect side molding, name plates, wheel cap logo emblems, edge guards, weather strips,…
Economical MOPP tape designed for temporary holding and surface protection of appliances. The rubber adhesive offers excellent adhesion and stain / residue free removal from painted metals, stainless steel, ABS plastic and other common appliance surfaces. Applications: Can also be used for general strapping, light bundling, unitizing and palletizing.
Patco 5400 combines a heavy duty, weather resistant polyethylene backing with a non-staining, clean removal, rubber based adhesive. U.V. & weather resistant. Highly conformable. Clean removal. Will not breakdown after extended outdoor exposure. Adheres snugly to contoured and irregular surfaces. Will not leave adhesive residue, stains, or ghosting on most surfaces. Applications: Long term preservation,…
Patco 5410 combines heavy duty, weather resistant polyethylene backing with a non-staining, clean removal, and rubber based adhesive. It is UV and weather resistant, highly conformable, removes cleanly, and will not breakdown after extended outdoor exposure. It adherse snugly to contured and irregular surfaces, and will not leave adhesive residue, stains, or ghosting on most…
Patco 542 is a Medium-Density Polyethylene with Rubber-based PSA. Solvent & moisture resistant. Abrasion resistant. Conformable. Controlled Unwind. Clean removal. Applications: Patching and sealing shrink wrap to boat hulls. Splicing, seaming, and sealing polyethylene films.
Berry Plastics Polyken 221 is a high-quality, solvent-resistant cloth tape. It is designed for silk screening, packaging, and sealing applications. It features a high performing polyethylene coated cloth backing, and a solvent resistant natural rubber adhesive. It is conformable. Available in white color only. Applications: Screen blocking of frames in the screen print industry. Waterproof…
Polyken 348 service jacket sealing (ASJ) tape has a tri-directional fiberglass reinforced backing. It features: High Tack Adhesive. Tri-directional fiberglass. Excellent Aging Characteristics. Easily Applied. Good Holding Power At Low / Elevated Temperatures. Color: White. Applications: Used as a permanent closure system and vapor barrier on ASJ faced duct and pipe systems.
Saint-Gobain® CHR 2242-5ER is manufactured from our own 125 μ (5.0 mil) high modulus, sintered extruded PTFE Films with 25 μ (1.0 mil) of pressure sensitive acrylic adhesive and a backside treated for improved self-bonding in a wrapping application. CHR 2242-5ER is a durable product with high dielectric strength. Acrylic adhesive systems provides for some of the highest bond strength…
CHR 23816 is manufactured from silicone rubber/fiberglass cloth backing coated with high-temperature silicone adhesive. 23816 tape is designed to withstand both the punishing abrasion of grit blasting and the extreme temperatures/pressures associated with the plasma spray process. The adhesive of it is a high-temperature silicone, which allows the product to withstand continuous temperatures up to 500◦F…
CHR 2905 is manufactured from heat-resistant fiberglass cloth backing coated with high-temperature silicone adhesive on both sides. CHR 2905 is exceptionally stable at high temperatures, allowing it to withstand temperatures up to 260°C. A non-corrosive product, 2905 is used in a variety of critical electrical applications. Other characteristics include excellent abrasion and edge tear resistance and exceptional flex strength. CHR 2905 is available…
CHR 2905 is manufactured from heat-resistant fibreglass cloth backing coated with high-temperature silicone adhesive on both sides. CHR 2905 is exceptionally stable at high temperatures, allowing it to withstand temperatures up to 260°C. A non-corrosive product, 2905 is used in a variety of critical electrical applications. Other characteristics include excellent abrasion and edge tear resistance and exceptional flex strength. CHR 2905 is available…
CHR 2975 is manufactured from silicone rubber/fiberglass cloth backing coated with high-temperature adhesive. 2975 tapes are designed to withstand both the punishing abrasion of grit blasting and the extreme temperatures/pressures associated with the plasma spray process. The adhesive is a high-temperature silicone, which allows the product to withstand continuous temperatures up to 500◦F and also prevents…
CHEMSIL silicone coated fiberglass fabrics combine the superior strength and dimensional stability of woven fiberglass with a high temperature silicone coating. These fabrics exhibit excellent thermal and mechanical properties. Additionally, the silicone coating provides better friction than PTFE coated fabrics with very good release properties — especially when in contact with adhesives and other tacky…
CHEMSIL silicone coated fiberglass fabrics combine the superior strength and dimensional stability of woven fiberglass with a high temperature silicone coating. These fabrics exhibit excellent thermal and mechanical properties. Additionally, the silicone coating provides better friction than PTFE coated fabrics with very good release properties — especially when in contact with adhesives and other tacky…
CHEMSIL silicone coated fiberglass fabrics combine the superior strength and dimensional stability of woven fiberglass with a high temperature silicone coating. These fabrics exhibit excellent thermal and mechanical properties. Additionally, the silicone coating provides better friction than PTFE coated fabrics with very good release properties — especially when in contact with adhesives and other tacky…
CHEMSIL silicone coated fiberglass fabrics combine the superior strength and dimensional stability of woven fiberglass with a high temperature silicone coating. These fabrics exhibit excellent thermal and mechanical properties. Additionally, the silicone coating provides better friction than PTFE coated fabrics with very good release properties — especially when in contact with adhesives and other tacky…
CHEMSIL silicone coated fiberglass fabrics combine the superior strength and dimensional stability of woven fiberglass with a high temperature silicone coating. These fabrics exhibit excellent thermal and mechanical properties. Additionally, the silicone coating provides better friction than PTFE coated fabrics with very good release properties — especially when in contact with adhesives and other tacky…
Saint Gobain CHR 2905 is manufactured from heat-resistant fiberglass cloth backing coated with high-tempertaure silicone adhesive on both sides. 2905 is exceptionally stable at high temperatures, allowing it to withstand temperatures up to 500F. A non-corrosive product, 2905 is used in a variety of critical electrical applications. Other characteristics include excellent abrasion and edge tear…
Saint Gobain CHR 2915 is manufactured from heat-resistant fiberglass backing, and coated with high-temperature silicone adhesive. 2915 is exceptionally strong abrasion resistant tape, that provides maximum solvent resistance. It has excellent temperature resistance and is thermally stable. It can but used in applications that require continuous temperatures of up to 500F, and its abrasion resistance…
Saint-Gobain CHR G551 is manufactured from electrical grade fiberglass cloth backing, and is coated with clear pressure-sensitive adhesive. G551 features a tough abrasion resistance and excellent mechanical and electrical properties. It is also highly conformable and non-corrosive. Applications: G551 is constructed to offer excellent solvent and flagging resistance. The high conformance and strength/weight ratio makes…
CHR® G569 are manufactured from electrical grade fiberglass cloth backing coated with clear pressure-sensitive adhesive. CHR® G569 feature a tough abrasion resistance and excellent mechanical and electrical properties. They are also highly conformable and non-corrosive. Applications: CHR® G569 are constructed to offer excellent solvent and flagging resistance. The high conformance and strength/ weight ratio makes…
CHR H7525 is heavy-duty pressure-sensitive tapes used for thermal spray masking. They are manufactured by combining multiple layers of silicone rubber, aluminum foil, and fiberglass coated with aggressive high-temperature silicone adhesive. H7525 has exceptional abrasion resistance and adhesion properties, which allows the tapes to wear very well during the spraying process. These tapes are also…
H7575 is a heavy-duty pressuresensitive tape used for thermal spray masking. They are manufactured by combining multiple layers of silicone rubber, aluminium foil and fibreglass coated with aggressive high-temperature silicone adhesive. H7575 has exceptional abrasion resistance and adhesion properties, which allows the tapes to wear very well during the spraying process. These tapes are also very conformable and…
HM430 is manufactured from high-modulus PTFE film coated with high-temperature silicone adhesive. The film has been subjected to a special process that lowers its elongation and increases its breaking strength for easier handling. One sde has an acrylic pressure sensitive adhesive and the other side offers low coefficient of friction film, which is thin and…
HM650 is manufactured from high-modulus PTFE film with pressure-sensitive adhesive. The film has been subjected to a special process that lowers its elongation and increases its breaking strength for easier handling. One side has an silicone pressure sensitive adhesive and the other side offers low coefficient of friction film, which is thin and conformable. The…
M Series is manufactured from polyester film with silicone pressure-sensitive adhesive. It offers excellent high/low temperature resistance. The polyester backing resists damage from sharp edges. The tape combination of silicone and polyester make it highly conformable. Applications: Offers an economical method to hold, insulate and/or protect materials
M Series is manufactured from polyester film with acrylic pressure-sensitive adhesive. Designed to have excellent flagging resistance and good conformability. They have compatible adhesive and release coating for excellent printability, whether on roll or a finished component. Also, they have excellent solvent and oil resistance, and adhesive can be thermoset to increase adhesion and solvent…
M Series is manufactured from polyester film with acrylic pressure-sensitive adhesive. Designed to have excellent flagging resistance and good conformability. They have compatible adhesive and release coating for excellent printability, whether on roll or a finished component. Also, they have excellent solvent and oil resistance, and adhesive can be thermoset to increase adhesion and solvent…
CHR PS.25 is manufactured from high performance fiberglass reinforced, polyester film with pressure sensitive acrylic adhesive. Superior tensile strength and adhesion coupled with excellent dielectric value makes these tapes ideal for providing a reinforcing functionality in electromagnetic devices. CHR PS.25 is rated as a Class 155°C (Class F) type electrical insulation products and can operate at temperature as low as -29°C. Applications: designed…
CHR PS.30 is manufactured from high performance fiberglass reinforced, polyester film with pressure sensitive acrylic adhesive. Superior tensile strength and adhesion coupled with excellent dielectric value makes these tapes ideal for providing a reinforcing functionality in electromagnetic devices. CHR PS.30 is rated as a Class 155°C (Class F) type electrical insulation products and can operate at temperature as low as -29°C. Applications: designed…
The T Series are manufactured from skived PTFE film coated with high-temperature silicone adhesive. One side of the tape has a silicone pressure sensitive adhesive and the other side offers low coefficient of friction PTFE film, which is thin and conformable. PTFE backing offers excellent high temperature resistance and is chemically inert. The tape’s construction…
The T Series are manufactured from skived PTFE film coated with high-temperature silicone adhesive. One side of the tape has a silicone pressure sensitive adhesive and the other side offers low coefficient of friction PTFE film, which is thin and conformable. PTFE backing offers excellent high temperature resistance and is chemically inert. The tape’s construction…
The T Series are manufactured from skived PTFE film coated with high-temperature silicone adhesive. One side of the tape has a silicone pressure sensitive adhesive and the other side offers low coefficient of friction PTFE film, which is thin and conformable. PTFE backing offers excellent high temperature resistance and is chemically inert. The tape’s construction…
The T Series are manufactured from skived PTFE film coated with high-temperature silicone adhesive. One side of the tape has a silicone pressure sensitive adhesive and the other side offers low coefficient of friction PTFE film, which is thin and conformable. PTFE backing offers excellent high temperature resistance and is chemically inert. The tape’s construction…
Tesa 4934 is a Double-Sided tape cloth tape. It consists of a fabric backing with a thick, tacky adhesive coating, and the synthetic rubber adhesive is solvent free. Tesa 4934 is a general purpose mounting tape, and is easily hand tearable. Applications: due to the flexible fabric backing and the high coating weight, it is…
Tesa® 4939 is a double-sided floor laying tape. It consists of a strong PET-cloth backing in combination with a differential rubber adhesive system. The special formulated adhesive on the open side combines a high initial bonding power with residue-free removability of up to 14 days from the most common surfaces. (Needs to be tested individually…
Tesa 4954 is a general purpose double-sided tape. It offers extremely high sheer strength, very good tack, and a creped silicone paper liner. Applications: fixing of aluminum, leather, and PVC during the manufacturing process
Tesa 4964 consists of a tear resistant flexible fabric backing with a rubber adhesive system. The adhesive has a high coating weight, making it well suited for mounting applications on irregular surfaces. In most cases, Tesa 4964 can be removed without leaving adhesive residues from sound surfaces. Initial tests should be carried out before mounting…
Tesa 4968 is a white double-sided self-adhesive tape consisting of a PVC-backing and a tackified acrylic adhesive. Tesa 4968 has an outstanding adhesion level even to critical low surface energy materials, such as PP and PE. It also features immediate functionality of the laminated bond due to excellent initial tack, and a light and age-resistant…
Address
1061 King Industrial Drive
Marietta, Georgia 30062
SE HABLA ESPAÑOL!
© 2025 Industrial Tape & Supply / Accessibility