Search our extensive catalog:
Showing all 32 results
3M™ Aluminum Foil/Reinforced Tape 1430 is a dead soft aluminum foil tape combined with a non-woven web. It has a press sensitive adhesive and offers the superior sealing benefits of foil with the ease of handling and strength of cloth. Aluminum backing provides an excellent reflective surface for both heat and light. Performs from -56°F (-54°C)…
3M™ Splicing Tapes utilize an acrylic pressure sensitive adhesive system that offers a balance of initial adhesion and good holding power. 3M™ Splicing Tape 469 has high initial adhesion, high contact heat resistance and good adhesion to a variety of paper grades and thicknesses and is ideal for bonding a variety of similar or dissimilar materials. …
3M™ Repositionable Tapes are double coated tapes that are ideal for applications where one or both parts need to be repositioned or removed easily. 3M™ Repositionable Tapes 9425 have a medium tack adhesive on the back side (exterior of roll) and a high tack (“permanent”) adhesive on the face side (interior of roll) of the tape….
3M™ Double-Coated Tapes 9731 have a firm, silicone pressure sensitive adhesive coated on one side of a polyester film carrier and a high performance acrylic adhesive coated on the other side of the carrier. Silicone adhesive provides good bond to silicone rubber, strong holding power to various silicone surfaces, good temperature performance and good solvent resistance. 3M™…
3M™ Double-Coated Tapes 99786 and 99786NP with 3M™ Adhesive 300MP provide high adhesion to a wide variety of materials, including plastics and foams and has a thin nonwoven carrier for dimensional stability and improved handling. Excellent adhesion to open cell foams. Consistent adhesive performance to many plastics. Polycoated liner for ease of handling. Applications: foam lamination, gasket attachment,…
3M™ Double-Coated Tapes 99786 and 99786NP with 3M™ Adhesive 300MP provide high adhesion to a wide variety of materials, including plastics and foams and has a thin nonwoven carrier for dimensional stability and improved handling. Excellent adhesion to open cell foams. Consistent adhesive performance to many plastics. Polycoated liner for ease of handling. Applications: foam lamination, gasket…
3M™ Repulpable Splicing System 9990N is a double coated, splittable tape construction designed for straight line flying splices, featuring an acrylic adhesives and an easy release paper liner, with liner scored for easy manual application and a built-in sensor layer. The built-in Aluminum sensor within tape construction eliminates the need for the traditional reflective label needed…
3M™ Repulpable Tapes R3227, R3257, R3287 and R3287SL† are double coated tapes with paper carriers coated with a high tack, high shear strength, repulpable adhesive. The tapes have repulpable easy-release paper liners. Water and alkali dispersibility are excellent and eliminate risk of contaminating the paper mill broke with non-repulpable materials. Packing in sealed plastic bags helps…
Avery Dennison FL 1003 is a highly conformable dead-soft 1.5 mil foil face stock, quick-stick rubber-based adhesive, and strong bleached 40# densified kraft liner. Conformable foil bonds to curved contoured surfaces. Strong bond to a variety of substrates. Product reliability. Applications: Suitable for die-cut shapes, shielding, moisture and vapor barrier sealing components or lamination to…
An aggressive pressure sensitive flatback with an adhesive that has been specifically designed to offer a strong and secure seal on a variety of substrates. This product is not repulpable. Applications: carton sealing, packaging, light duty, splicing, tabbing, and picture framing
Bloc-It is a 14 day UV resistant, edge-treated specialty masking tape. Teal colored, high quality fine crepe paper masking tape with a specially formulated pressure-sensitive rubber based adhesive. Designed for exposure to sunlight and special edge treatment that prevents paint bleeding for the crispest, cleanest paint lines possible. Easy, clean removal from most surfaces. Should…
Blue fine crepe paper masking tape with a specially formulated pressure-sensitive synthetic rubber adhesive designed for exposure to sunlight up to fourteen days. Exhibits easy, clean removal from most surfaces. Excellent conformability as well as smooth backing for superior paint lines and reduced fingertip abrasion. Consistent, easy unwind and resistant to humidity and paint bleed-through….
Patco 167 High Temp PVC Fineline Masking Tape Applicaitons Masking color separations on plastic automotive fasoia, trim, and finished metals in high temp OEM bake cycles (280 °F for 45 min)*Aircraft paint operationsOEM paint line powerwash cycles Clean room paint masking FeaturesPVC film backingRubber based adhesiveClean-out plastic core Benefits Tough and conformableTranslucent for easy application and inspectionWaterproof…
Patco 1776 is a low stretch PVC film with a rubber based pressure sensitive adhesive tape. Conformable & solvent resistant. Excellent high temperature performance. Handles compound curves, detail work, various solvents, OEM, and autobody application demands. Clean removal. Applications: Automotive OEM Fineline and bulk masking (Rim & TPO plastics). High temperature bake cycles, OEM paintline,…
Patco 5005 UV & Abrasion Resistant PE Film Tape ApplicationsPatching and seamingOverlaminatingIndoor/outdoor surface protectionProtection against moisture, UV, solvents, and abrasion. FeaturesMDPE FilmAcrylic adhesive Benefits Tough and abrasion resistantUV stable for outdoor applicationsNon-yellowingStands up to harsh environmentsSuper clear film for invisible protectionAdheres aggressively to surfacesRemoves cleanly with no adhesive build upNo edge bleedExcellent long-term stability
Patco 503A offers durability, excellent conformability and a solvent resistant backing combined with an aggressive permanent adhesive system. Excellent moisture barrier. Excellent long-term aging. Provides a permanent seal indoors or outside. Will not crack or craze after extended exposure. Applications: Excellent for decorative markings, color coding, striping, and as a protective overlaminate. Thermal insulation outer…
Patco 503R offers durable conformability combined with an aggressive permanent rubber based adhesive. Excellent moisture barrier. Chemical resistant. Controlled unwind during application. Provides a permanent seal indoors or outside. Stands up to many harsh solvents and chemicals. Conforms snugly to irregular surfaces. Applications: Designed as a general purpose sealing, seaming, splicing, and spiral wrapping tape….
Patco 5068 has a Low Density Polyethylene backing with acrylic-based pressure sensitive adhesive. Conformable to irregular surfaces. Performs well over a wide temperature range. Optically clear & hand-tearable. Easy unwind. Excellent moisture barrier. Applications: Short term Greenhouse patch & repair. General purpose sealing, splicing, and seaming. Surface protection and temporary hold-down applications.
Patco 555 combines the conformability, abrasion, and chemical resistance of polyethylene film with an acid-free permanent acrylic adhesive system. Also available with 53# Kraft release liner. Conformable and performs well over a wide temperature range. High adhesion over long periods. Excellent clarity with no yellowing or discoloration. Applications: Overlaminate for books, magazines, and documents. Conforms…
Patco 5565FR is a flame retardant surface protection tape with clean removal polythylene film tape and acrylic adhesive. Meets FAR 25.853(a). Abrasion, moisture & solvent resistant. Clean removal from most surfaces. Applications: Aircraft general surface protection applications on various surfaces during general maintenance within aircraft interiors.
Patco 560 Removable Polyethylene Film Tape ApplicationsTemporary surface protection Color coding, product and packaging identificationSplicing plastic film materialsSurface and label overlaminate Features Acrylic adhesive LDPE Film BenefitsSolvent resistant Easy to applyThick and highly conformableAbrasion and moisture resistantStands up to mechanical and chemical wearRemoves cleanly- will not leave residueExcellent high and low temperature performance
Patco 565 Polyethylene Screenblock Tape is a low-density polyethylene film with acrylic adhesive designed to be used as a protective mask exhibiting excellent chemical, moisture, and abrasion resistance. Superior conformability. Stretches with screen during frame re-tensioning. Prevents leakage from inks & cleaners. 500% elongation capacity. Good tack and moderate adhesion. Provides clean removal from most…
Patco 570 Colored Polyethelene Clean Room Tape is a low-density polyethylene with an acrylic-based PSA for temporary applications requiring residue-free removal. Low in halogens and leachable chlorides. Minimizes contamination risk over traditional PVC products. Excellent conformability; hand-tearable; residue-free removal. Applications: Excellent for color coding, sealing clean room containers, identification of products and packaging materials. Works…
Patco 575A Colored Clean Room Tape low density polyethylene with an acrylic PSA available in a wide range of colors. Low in halogens, leachable chlorides, and heavy metals. Minimizes risk of contamination over traditional PVC products. Permanent bond with no bleed out, excellent conformability. Hand-tearable for easy application. Applications: Excellent for color coding, sealing clean-room…
Patco 575R is a Polyethylene Film tape with rubber-based adhesive. Low in halogens, leachable chlorides, and heavy metals. Moderate adhesion with no edge bleed. Easy unwind. Recyclable plastic core. Available in 8 glossy colors- Black, Blue, Clear, Orange, Red, Green, White, and Yellow. Applications: Suitable for color coding & sealing of clean room containers. Identification of…
Patco 580 is a PE/Acrylic PSA tape which combines durability, conformability and solvent resistance. Tough and conformable backing. Excellent solvent and chemical resistance. Good adhesion, and clean removal. Fiber-free, recyclable core. Available in Clear & 8 glossy colors- White, Black, Red, Blue, Yellow, Green, Brown, and Orange. Applications: Border & blockout tape for the screen printing…
Patco 585 consists of a highly conformable, durable polyethylene substrate combined with an aggressive permanent adhesive system. Good insulator. Excellent conformability. Good U.V. and moisture resistance. Allows for permanent seal. Long life protection indoors or outdoors. Prevents build up of corrosion. Applications: Used as a permanent barrier between dissimilar metals, this tape prevents electrolytic corrosion….
Berry Plastics Polyken 347 Premium Foil Tape’s Aluminum foil backing provides a vapor barrier protection from moisture, contamination or corrosion. 1. Acts as a heat shield, minimizing heat transfer. 2. The product demonstrates superior conformability, adapting to irregular surfaces extremely well. Acrylic Adhesive System developed for solvent resistance and clean removal from surfaces. 1. High…
Premium printable tape available in 4 colors. Ideal for use in packaging, bundling, holding, binding, splicing, labeling, color coding, banding, decorating, and identification on various substrates. Features flexibility, oil and stain resistance and excellent adhesion performance. Colors- Blue, Green, Yellow, Red, and White. Applications: labeling, color coding, marking, and bundling.
Tesa 4316 is a finely crêped paper masking tape. The product is thin and flexible and, therefore, suitable for all general masking applications, as well as oven drying applications up to a temperature of 212°F (100°C). Applications: resistant to wet sanding, paints and fillers adhere well to the backing, material can be used on painted…
Tesa Easy Cover® 4368 Universal is a combination of an environment-friendly HDPE film and a slightly creped adhesivepaper tape used for the masking of large areas in one working step. It is resistant against dispersion paints and can easily be removed without residue after short term applications. The embossed film avoids paint bleeding or leaking to…
Tesa 50124 is a high shear creped paper masking tape with cured rubber-based adhesive. It provides excellent adhesion to a variety of surfaces in a wide range of application fields. Applications: light duty bundling, packaging and closing, light duty masking, non-critical, and painting applications
Address
1061 King Industrial Drive
Marietta, Georgia 30062
SE HABLA ESPAÑOL!
© 2026 Industrial Tape & Supply / Accessibility