Search our extensive catalog:
Showing all 15 results
3MTM Crepe Masking Tape 202 is a high performance, excellent paint masking tape for holding, protecting and bundling where a pressure sensitive tape is needed. Applications: painting, automotive, electronics, general industrial use, transportation, metalworking, woodworking, holding, protecting, bundling, labeling
Scotch® High Performance Masking Tape 232 is designed to be used in medium temperature paint bake operations. It has been laboratory tested on painted panels and found to remove cleanly at bake temperatures of up to 250°F (121°C) for 30 minutes. The actual temperature and time performance may be higher or lower for a given…
3M™ Performance Yellow Masking Tape 301+ is an industrial strength yellow colored smooth crepe paper masking tape for paint masking, holding, bundling, and identifying applications. 3M proprietary solvent-free adhesive sticks with confidence to most surfaces – including metal, rubber, glass, and plastic – while removing cleanly in one piece. Strong yellow crepe-paper backing conforms to irregular surfaces,…
3M™ Lead Foil Tape 34201 is a 5 mil thick, 100% pure lead foil tape coated with a synthetic rubber adhesive system which exhibits good adhesion to a wide variety of surfaces, especially to metal, glass, films, foils, and papers. The lead foil is highly malleable and can be shaped to the most intricate patterns. …
3M™ Lead Foil Tape 421 is backed with a rubber adhesive, offering excellent conformability in a variety of application conditions, indoors and out. Good thermal properties and will perform over a wide variety of temperature conditions (-60° to 225°F or -54° to 106°C). It has been used at higher temperatures for shorter duration. It is…
3M™ Polyester Film Tape 8412 has excellent tensile strength and abrasion resistance, that can be used for many permanent edging and reinforcing types of applications. Polyester backing provides puncture resistance. Long aging acrylic adhesive to help reduce failures often caused by adhesive degradation. Applications: Protection from abrasion; Applications requiring puncture resistance; Printing plate, registration hole reinforcement
Adchem 3600A Double-Coated Tape ApplicationsGeneral purpose laminating for paper, felt, foam and plastic. Assembly and fastening of componentsGeneral purpose splicing applications FeaturesPolyester film carrierAcrylic adhesive60lb Silicone coated kraft liner BenefitsSupport for aid in processing and applicationEasily conforms to various surface typesHigh tack, medium peel adhesiveBonds well to ABS, PC, LDPE, and HDPEEasy to die cut…
Avery Dennison FBA 1960 has a high tack acrylic adhesive, superior die cutting properties, and densified kraft release liner. Excellent initial tack and adhesion, adheres to a wide variety of substrates, and excellent foam bonding characteristics. Also available on 12 pt board liner. Applications: Designed for use in foam bonding applications bonding to medium and…
Avery Dennison FT 8380 has a specially formulated rubber based adhesive, polyester carrier, and densified kraft release liner. Clean removability from painted metal, glass, and aluminum. Excellent cold temperature performance. Applications: Designed for use on bonding point-of-purchase display information to shelving materials.
A beige, smooth crepe paper masking tape with a pressure-sensitive natural rubber adhesive. Offers an excellent balance of quick stick, panel adhesion and holding properties. Recommended for most paint masking applications where excellent cornering with clean removal is desired. Will support masking paper aprons at 160°F (70°C) for 30 minutes. Not recommended for outdoor exposure….
CHR Brown SGB6 is fibreglass fabric impregnated with PTFE, laminated to a proprietary PTFE film that is then coated on one side with high-temperature, silicone pressure-sensitive adhesive. CHR SGB6 is a laminate construction offering a relatively thick and consistent layer of PTFE over the entire cloth surface. This makes it more durable and longer lasting than conventionally produced tapes. The combination of…
Engineered utilizing a heavy smooth crepe backing combined with a moderate temperature rubber adhesive system, this high heat masking tape exhibits a smooth, consistent unwind which delivers a user-friendly product during application. Ideally suited for demanding masking applications in the transportation, marine and metal fabrication industries and is often used as an automotive masking tape….
Tesa 4962 is a double-sided tape consisting of a non-woven backing and a tackified acrylic adhesive. It features high adhesion values on different substrates, excellent wetting (grabbing) power to rough surfaces, and excellent temperature resistance performance. Applications: mounting of plastic parts, bonding of heavy paper, and lamination of textile, leather and foam parts
Tesa 4967 is a transparent double-sided self-adhesive tape consisting of a PET backing and a modified acrylic adhesive. Tesa 4967 features especially: Extremely high holding power even at elevated temperatures. Superior converting performance due to strong PET backing and reduced adhesive mass flow. Good bonding performance even to LSE materials. Applications: Mounting lenses to mobile…
Tesa 51571 is a double-sided tape with a non-woven backing. It is used for permanent mounting of metal and plastic materials, e.g. aluminium, polystyrene, polypropylene, ABS. The very thick layer of adhesive bonds extremely well on uneven surfaces and has a very high initial bond. Applications: mounting of evaporator plates in the production of refrigerators
Address
1061 King Industrial Drive
Marietta, Georgia 30062
SE HABLA ESPAÑOL!
© 2026 Industrial Tape & Supply / Accessibility