Search our extensive catalog:
Showing all 55 results
3M™ Circuit Plating Tape 1280 is a polyester film tape with unique adhesive for printed circuit board masking during electroplating. Low stretch polyester film for machine, as well as hand application. Solvent clean up of the board is recommended to facilitate subsequent soldering. Polyester backing reduces stretch and recovery of tape and associated uneven stop-off line. Thick adhesive coating…
3M™ Super Bond Film Tape 396 is a polyester film tape for adhering to polyesters, polyethylenes and many other difficult-to-adhere-to surfaces. Polyester backing for abrasion, chemical and thermal resistance. Aggressive adhesion that adheres to many difficult-to-stick-to surfaces. Applications: splicing, sealing, repairing, holding and reinforcing a variety of difficult-to-hold materials; repairing and reinforcing high-wear areas of rip-stop nylon;…
3M™ VHB™ Thin Foam Tapes are thin foam tapes with pressure sensitive adhesive on both sides and are used for bonding a wide range of materials, including many paints and lower surface energy plastics in addition to metals and other plastics. The foam is conformable to increase contact with the surfaces. This tape is similar…
3M™ VHB™ Thin Foam Tapes are thin foam tapes with pressure sensitive adhesive on both sides and are used for bonding a wide range of materials, including many paints and lower surface energy plastics in addition to metals and other plastics. The foam is conformable to increase contact with the surfaces. This tape is…
3M™ VHB™ Thin Foam Tapes are thin foam tapes with pressure sensitive adhesive on both sides and are used for bonding a wide range of materials, including many paints and lower surface energy plastics in addition to metals and other plastics. The foam is conformable to increase contact with the surfaces. This tape is…
3M™ VHB™ Thin Foam Tapes are thin foam tapes with pressure sensitive adhesive on both sides and are used for bonding a wide range of materials, including many paints and lower surface energy plastics in addition to metals and other plastics. The foam is conformable to increase contact with the surfaces. This tape is…
3M™ Polyester Tape 8401 is designed for splicing many release coated papers. Increased initial bond can be achieved by applying heat – approximately 250°F (121°C). Polyester film resists splice failure due to shrinkage or embrittlement. A blended silicone and rubber adhesive to provide a higher initial bond to release treated surfaces than silicone adhesives. Applications: Butt splicing of release…
3M™ Edging and Reinforcing Tape 8411 is a transparent polyester film tape for many permanent edging and reinforcing types of applications. Strong polyester backing for good edge tear resistance. Long aging, non-yellowing, pressure sensitive acrylic adhesive. Thinness of tape helps keep pages flat. High transparency for ease of reading thru tape. Applications: paper edging, hole reinforcing, miscellaneous applications where a…
3M™ Polyester Film Tape 8412 has excellent tensile strength and abrasion resistance, that can be used for many permanent edging and reinforcing types of applications. Polyester backing provides puncture resistance. Long aging acrylic adhesive to help reduce failures often caused by adhesive degradation. Applications: Protection from abrasion; Applications requiring puncture resistance; Printing plate, registration hole reinforcement
3M™ Polyester Tapes 8421 and 8422 are for the photographic industry for splicing most film for processing through the developing chemicals. Frequently used in chemical baths at 150°F (66°C). Excellent solvent and chemical resistance, especially those found in photographic processes. Aggressive rubber adhesive grabs quickly and adheres well to a variety of films. Hot caustics will weaken backing…
3M™ Polyester Tapes 8421 and 8422 are for the photographic industry for splicing most film for processing through the developing chemicals. Frequently used in chemical baths at 150°F (66°C). Excellent solvent and chemical resistance, especially those found in photographic processes. Aggressive rubber adhesive grabs quickly and adheres well to a variety of films. Hot caustics will weaken…
3M™ Polyester Tape 8429 is a yellow splicing tape featuring a strong polyester backing that resists breakage in high tension applications. It features an aggressive, versatile rubber adhesive that is both solvent and chemical resistant. Designed for splicing of photographic film processing. Polyester backing is strong to resist breakage in high tension application. Backing thickness also provides…
3M™ Polyester Film Tape 850 can generally be used for splicing and applications where chemical resistance and/or clean removal is necessary. The silver backing is a transparent polyester with a thin layer of aluminum. Prolonged exposure to sunlight or hot caustics will cause backing to become brittle and lose tensile strength. Thin, high strength polyester film helps…
3M™ Polyester Tape 853 is comprised of strong, thin polyester backing with high shear, solvent resistant acrylic adhesive. These qualities make this tape ideal for applications where solvent exposure is a concern. It produces a reliable bond to a wide variety of substrates. The overall thinness this tape makes it ideal for splicing. Acrylic adhesive is…
3M™ General Purpose Polyester Tape 856 is a transparent polyester film tape for edging and reinforcing applications. Tough polyester backing for edge tear resistance. Applications: paper edging, hole reinforcing
3M™ Polyester Tapes 8901, 8902, and 8905 are all made with strong polyester backing and silicone adhesive, allowing them to be used in applications requiring high temperatures or adhesion to silicone treated surfaces. This tape family offers a range of backing thickness to accommodate application needs from thin tape for splicing to a thicker, stronger…
3M™ Polyester Tapes 8901, 8902, and 8905 are all made with strong polyester backing and silicone adhesive, allowing them to be used in applications requiring high temperatures or adhesion to silicone treated surfaces. This tape family offers a range of backing thickness to accommodate application needs from thin tape for splicing to a thicker,…
3M™ Polyester Tapes 8901, 8902, and 8905 are all made with strong polyester backing and silicone adhesive, allowing them to be used in applications requiring high temperatures or adhesion to silicone treated surfaces. This tape family offers a range of backing thickness to accommodate application needs from thin tape for splicing to a thicker,…
3M™ Polyester Tape 8911 is a transparent polyester tape with silicone adhesive that can be used in composite bonding, splicing, and applications that may require high temperature, chemical, and abrasion resistance with the benefit of transparency. Applications: Transparent splicing of silicone liner, films and papers; protective tape reduces scratches during handling and shipping; label protection
3M™ Polyester Tape 8991 is a blue polyester tape with a silicone adhesive. It can be used in a large variety of high temperature applications including powdercoat masking, flashbreaker, and bag sealing applications. Additional applications include, splicing, tabbing, or roll closing silicone treated liners or materials. Polyester films offer excellent thermal, abrasion, and chemical resistance while…
3M™ Polyester Tape 8992 is a dark green polyester tape with silicone adhesive. It can be used in a large variety of high temperature applications including powdercoat masking, flashbreaker, and bag sealing applications. Additional applications include, splicing, tabbing, or roll closing silicone treated liners or materials. Polyester films offer excellent thermal, abrasion, and chemical resistance…
Avery Dennison FBA 8960 has a polyester carrier, specially formuilated acrylic adhesive, and densified kraft release liner. Excellent processing and die-cutting stability. Good adhesion and tack to medium to high surface energy substrates. Adhesive resists mild plasticizers and environment exposures. Made in USA. Also available on 12 pt board liner. Applications: designed for applications requiring…
Avery Dennison FBD 8970 has a polyester carrier, specially formuilated acrylic adhesive, and densified kraft release liner. Excellent processing and die-cutting stability. Good adhesion and tack to medium to high surface energy substrates. Adhesive resists mild plasticizers and environment exposures. Made in USA. Also available on 12 pt board liner. Applications: designed for applications requiring…
Avery Dennison FBD 8950 has a polyester carrier, excellent tack and adhesion, and densified kraft release liner. Excellent processing and die-cutting stability. Suited for a broad range of general purpose applications. Also available on 12 pt board liner. Applications: designed for applications requiring quick stick and good adhesion to medium and high surface energy substrates….
Avery Dennison FT 0951 has a heavy film backing, linered construction for easy processing and die cutting, and crosslinked elastomer adhesive. Stiff backing makes application easier. Quick initial bond and consistent adhesions. Will not leave adhesive residue after long dwells or moderate heat exposure. Will remain removable even after long periods of time. Applications: Used…
Avery Dennison FT 310 has high tack laminating adhesive. Specially designed removable mounting side adhesive. Strong plastic carrier. Medium release liner. Removability. Provides good initial adhesion to a wide variety of packaging substrates and low density PE foams. Clean removal from plastic, wood and glass surfaces. Excellent resistance to UV light. Excellent die-cutting characteristics. Offers…
Avery Dennison FT 4302 has a high tack acrylic adhesive, superior die cutting properties, and polyester substrate. Excellent initial tack and adhesion. Adheres to a wide variety of substrates. Excellent foam bonding characteristics. Applications: Used in applications requiring an acrylic lamination to plastic and other low surface energy substrates.
Avery Dennison FT 702P has a polyester carrier, specially formulated acrylic adhesive, heavy mass of adhesive on liner side, and moisture-stable release liner. Elevated temperature, solvent and plasticizer resistance. Stability in processing and die-cutting. Applications: Designed for bonding to a wide variety of plastic, metal and foam substrates where resistance to plasticizers and high temperature…
Avery Dennison FT 8302 has a rubber-based adhesive system. Film carrier. Densified kraft release liner. Bonds to a broad range of substrates. Stability in processing and die-cutting. Applications: Developed as an economical general purpose product. Excellent for foam laminating. Possible Alternative Avery FBR 8950
Avery Dennison FT 8305 has a polyester carrier, specialty formulated rubber based adhesive, and densified kraft release liner. Combines high tack and adhesion with excellent shear. Excellent adhesion to low surface energy substrates. Excellent die-cutting stability. Applications: Designed for applications requiring an aggressive adhesive with good die-cutting characteristics.
Avery Dennison FT 8306 has a specially designed dual adhesive system, polyester carrier, and densified kraft release liner. It has removable adhesive on one side, and a permanent adhesive on the other. Excellent die-cutting and slitting characteristics. Permanent adhesive is excellent for foam bonding. Also available on a white PET liner. Applications: Designed for use…
Avery Dennison FT 8311 readily bonds to a variety of foams and plastics, polyester carrier, densified kraft release liner, and double coated construction. Excellent bond to most surfaces. Stable in processing and die-cutitng. Excellent foam bonding characterisitcs. Also available on 12 pt board liner. Applications: Designed for a variety of applications requiring initial quick stick….
Avery Dennison FT 8312 has a specialty formulated rubber based adhesive, clear polyester carrier, and heavy densified kraft release liner. Excellent processing and die-cutting. Combines high tack and adhesion with excellent shear strength. Excellent adhesion to low surface energy substrates. Applications: Designed for applications requiring an aggressive adhesive for use on a wide variety of…
Avery Dennison FT 8327 has a foam bonding rubber based adhesive on the unwind side. High performance rubber based adhesive, and heavy kraft release liner. Ease of die-cutting and liner removability. Specially formulated unwind adhesive bonds to a wide variety of foam materials. Also available on 12 pt board liner. Applications: Designed for bonding to…
Avery Dennison FT 8337 has a polyester carrier, densified kraft liner, and specially designed dual adhesive system. Excellent slitting and die-cutting. Removable adhesive on liner side, with a high tack permanent on the unwind side. Permanent adhesive is an excellent foam bonding adhesive. Applications: Designed to bond to a wide variety of substrates. It offers…
Avery Dennison FT 8345 has a polyester carrier, densified kraft liner, and specially formulated adhesive. Excellent processing and die-cutting stability. Combines high tack and adhseion with excellent shear strength. Excellent adhesion to low surface energy substrates. Applications:Designed for applications requiring an aggressive adhesive for use on a wide variety of substrates. This product is ideal…
Avery Dennison FT 8380 has a specially formulated rubber based adhesive, polyester carrier, and densified kraft release liner. Clean removability from painted metal, glass, and aluminum. Excellent cold temperature performance. Applications: Designed for use on bonding point-of-purchase display information to shelving materials.
Avery Dennison FT 8383 EZ has a polyester carrier, excellent tack and adhesion, densified kraft release liner, easy release, and tear resistant liner. Excellent processing and die-cutting stability. Suited for a broad range of general purpose applications. Applications: Designed for bonding to a wide variety of polyester urethane, polyether urethane and polyethylene foams used in…
Avery Dennison FT 8392 has a patented high performance acrylic adhesive on the unwind side, excellent environmental and chemical resistance, meets several OEM performance specifications, and heavy densified kraft release liner. Plasticizer resistant acrylic formulation. Release liner is optimized for die-cutting, dimensional stability and for easy handling and liner removal. Ester and urethane foam bonding…
Avery Dennison FT 8394 has a high performance liner rubber adhesive, reliable removable unwind adhesive, strong bleached glassine kraft relesae liner, and strong polyester carrier. Liner adhesive combines good adhesion with label dispensing ease. Unwind adhesive offers clean stable and reliable removability. Excellent die-cutting characteristics. Moisture and tear resistant carrier. UV detectable tape. Applications: Designed…
Avery Dennison FT 9302 SF is a double-linered, double-sided silicone/ acrylic polyester tape. It has Natural polycoated release liner for improved handling and die cutting properties. High performance liner side silicone adhesive. High performance unwind side with acrylic adhesive. Adheres to a wide variety of substrates. Good adhesion to low surface energy materials. Excellent initial…
Avery Dennison FT 9325 PG has an aggressive, high-tack, rubber based adhesive, excellent shear properties; room and elevated temperatures, and polyester carrier and densified kraft suitable for die cutting. Strong bond to a variety of substrates. Product reliability. Excellent adhesion to paper stock and corrugated substrates. Good cohesive strength adhesive. Applications: Excellent for applications requiring…
Avery Dennison FT 9394 has a reliable removable liner adhesive, densified kraft release liner, and strong polyester carrier. Unwind adhesive combines good adhesion with label dispensing ease. Liner adhesive offers clean stable and reliable removability. Excellent die-cutting characteristics. Moisture and tear resistant carrier. UV detectable tape. Applications: Designed for applications requiring good unwind side adhesion…
Avery Dennison FT B EZ has a polyester carrier, excellent tack and adhesion, and densified kraft easy release liner. Excellent processing and die-cutting stability. Suited for a broad range of general purpose applications. Applications: Designed to provide an economical product for purpose bonding.
Avery Dennison FT EZ 8 has a different rubber based adhesive on each side of a polyester carrier, and a densified kraft release liner. Excellent processing and die-cutting stability. Unwind adhesive excellent for foam bonding. Liner side adhesive provides short term removability from most metal surfaces. Applications: Ideal for applications requiring initial lamination to polyether…
Avery Dennison HPA 9353 has a strong polyester carrier, high performance acrylic based adhesives, and excellent “holding power”. Ready made for die cutting. Ease in slitting and processing. Elevated temperature, plasticizer and solvent resistance. Good foam bonding characteristics / improved with heat lamination. Applications: Designed for bonding to a wide variety of engineered plastics, metals,…
DESCRIPTION Polyester (PET) film backing with a siliconeadhesive. Designed to perform in difficultmasking operations such as the masking ofsurfaces during application of durablepowder coatings. PET backing providesflexibility/conformability, solvent resistance,and chemical resistance. Removes withoutleaving residue on surfaces. Precision cutfor tear resistance and clean, crisp paintlines. PRODUCT APPLICATIONS Used for high temperature masking as inpowder coatings and…
DESCRIPTION Polyester (PET) film backing with a siliconeadhesive. Designed to perform in difficultmasking operations such as the masking ofsurfaces during application of durablepowder coatings. PET backing providesflexibility/conformability, solvent resistance,and chemical resistance. Removes withoutleaving residue on surfaces. Precision cutfor tear resistance and clean, crisp paintlines. PRODUCT APPLICATIONS Used for high temperature masking as inpowder coatings and…
DESCRIPTION Polyester (PET) film backing with a siliconeadhesive provides flexibility, solvent resistance,puncture resistance, high chemical resistance,and excellent long term aging characteristics.Provides secure seal without leakage.Removes cleanly. PRODUCT APPLICATIONS Protects printed circuitry from plating solutionsand fumes without contaminating bathsolutions such as those used in tin/leadstripping and ‘gold-finger’ plating operations.Can also be used for splicing of release-coatedpaper…
Intertape RG15 is a clear, fiberglass reinforced polyester-backed pressure-sensitive strapping tape with a natural rubber/resin adhesive. Medium tensile strength, good adhesion and medium impact strength. Transparency permits visibility for retail items, packaging and bundling applications. Operating temperature range 40°F to 200°F (4°C to 93°C). Applications: Provides excellent adhesion to kraft cartons bundling applications.
Intertape RG16 is a fiberglass reinforced polyester-backed pressure-sensitive strapping tape with a natural rubber/resin adhesive. High tensile strength, high adhesion and medium impact strength. Designed for packaging, reinforcing clips, combining containers, transparency permits visibility. Applications: Strapping, unitizing, packaging and bundling.
CHR MCL Cling Polyester is polyester film coated with a high temperature UV resistant cling adhesive. CHR MCL Cling Polyester has excellent temperature and chemical resistance. Shrinkage in both directions is less than 1%. It clings well to many smooth surfaces such as glass, silicone, rubber, and other plastics. It is repositionable and UV resistant. The backside is printable for displays,…
CHR MCL Cling Polyester is polyester film coated with a high temperature UV resistant cling adhesive. CHR MCL Cling Polyester has excellent temperature and chemical resistance. Shrinkage in both directions is less than 1%. It clings well to many smooth surfaces such as glass, silicone, rubber, and other plastics. It is repositionable and UV resistant. The backside is printable for displays,…
CHR MCL Cling Polyester is polyester film coated with a high temperature UV resistant cling adhesive. CHR MCL Cling Polyester has excellent temperature and chemical resistance. Shrinkage in both directions is less than 1%. It clings well to many smooth surfaces such as glass, silicone, rubber, and other plastics. It is repositionable and UV resistant. The backside is printable for displays,…
MSP150-3 polyester splicing tape features: high tack (excelllent for flying splices), high temperature adhesion, clean removal, tear and snap resistant. Applications: CHR® MSP150-3 is a high tack, high performance splicing tape with a temperature-resistant, silicone adhesive designed to adhere to a variety of surfaces including silicone release papers and films. Excellent for flying splice applications when…
Address
1061 King Industrial Drive
Marietta, Georgia 30062
SE HABLA ESPAÑOL!
© 2026 Industrial Tape & Supply / Accessibility